Carbon Fiber Sheet
Bayani
Takardun fiber carbon na manyan aikace-aikace ne, kuma yana iya zama madaidaiciyar sauyawa ga takardar aluminium don nauyi da taurin sa.Akwai alamu biyu na takardar fiber carbon yanzu, twill da bayyane.Ƙarshen takardar fiber carbon fiber, wanda aka yi da T300 carbon fiber filament, yana da haske kuma mai santsi tare da tauri mai kyau.Bugu da kari, yana da nauyi mai nauyi, juriya na lalata, da kuma dorewa mai kyau.The carbon fiber takardar ne sosai customizable.
Carbon Fiber filament bayani dalla-dalla
| Nau'in | JG4524Y |
| Rage | 25K |
| Abubuwan Carbon (g/m³) | 1.76-1.80 |
| Modulus (GPA) | 230-250 |
| Abun guduro(%) | 1.0-1.3 |
| Tsawaita(%) | ≥1.9 |
| Ƙarfin Tensile (MPa) | ≥3900 |
| Cv mai ƙarfi (%) | ≤4.5 |
Bayanin Epoxy
| Alamar | Yubo |
| Yawan guduro | 1.16-1.21 |
| Lokacin Gel (a ƙarƙashin 115℃) | 12-14 min |
| Rayuwar Shelf (kasa da 25℃) | ≤Kwanaki 30 |
| Dankowa (kasa da 70℃) | 15000-25000cps |
| Canjin Gilashi | 120-130℃ |
| Ƙarfin Ƙarfin Ƙarfi | 11000 psi |
| Karfin Lankwasawa | 12000psi |
Prepreg ƙayyadaddun bayanai
| Tsarin Fabric | Unidirectional |
| Preg Preg Content(g/㎡) | 238±1 |
| Kauri (mm) | 0.16±0.01 |
| Abubuwan da ke cikin Epoxy(%) | 37±0.5 |
| Kayayyakin Shirya Surface | Fim din PE |
| Kayan Aiki na Kasa | Takardar Saki |
Carbon Fiber filament bayani dalla-dalla
| Nau'in | JG4524Y |
| Rage | 25K |
| Abubuwan Carbon (g/m³) | 1.76-1.80 |
| Modulus (GPA) | 230-250 |
| Abun guduro(%) | 1.0-1.3 |
| Tsawaita(%) | ≥1.9 |
| Ƙarfin Tensile (MPa) | ≥3900 |
| Cv mai ƙarfi (%) | ≤4.5 |
Bayanin Epoxy
| Alamar | Yubo |
| Yawan guduro | 1.16-1.21 |
| Lokacin Gel (a ƙarƙashin 115℃) | 12-14 min |
| Rayuwar Shelf (kasa da 25℃) | ≤Kwanaki 30 |
| Dankowa (kasa da 70℃) | 15000-25000cps |
| Canjin Gilashi | 120-130℃ |
| Ƙarfin Ƙarfin Ƙarfi | 11000 psi |
| Karfin Lankwasawa | 12000psi |
Prepreg ƙayyadaddun bayanai
| Tsarin Fabric | Unidirectional |
| Preg Preg Content(g/㎡) | 238±1 |
| Kauri (mm) | 0.16±0.01 |
| Abubuwan da ke cikin Epoxy(%) | 37±0.5 |
| Kayayyakin Shirya Surface | Fim din PE |
| Kayan Aiki na Kasa | Takardar Saki |
fasaha mai mahimmanci:
1. An saita sigogi na iska daidai da dacewa don tabbatar da cewa ƙarshen samfurin yana da kyau kuma ba shi da gashi.
2. Gudun jujjuyawar daidai ne, kuma ana sarrafa tashin hankali a hankali.Dukan iskar ƙaƙƙarfa ce kuma cikakke.
3. Yi cikakken lissafin hulɗar ɗan adam-na'ura, domin aikin ya dace kuma yanayin zane na waya ya dace.
4. Karatun kai na waƙa mai jujjuyawa daidai ne kuma saurin jujjuyawar igiya daidai ne kuma mai ma'ana.
5. Madaidaicin dabi'u na tashin hankali na iska, rabon iska da sauran sigogin tsari ya kamata a saita su bisa ga gwaninta daban-daban na lambar K.
6. Matsayin kariyar naúrar ya yi la'akari da ƙayyadaddun ƙayyadaddun ƙwayar carbon fiber don tabbatar da cewa kayan aiki da kansa an rufe shi kuma yana da yanayin musayar zafi.
babban Innovation:
1. Sabuwar fasahar yankewa ta atomatik an karɓa a matsayi na yanke, tare da babban rabon nasara mai girma, m karaya surface da barga winding mataki.
2. Sabuwar hanyar ƙarfafawa ta atomatik an karɓa a ɓangaren ƙarfafawa, tare da babban ƙarfin tashin hankali kuma babu motsi axial.
3. An karɓi sabon tsarin sarrafa tashin hankali a wayar gubar, amsawar kusurwar hannu daidai ne, kuma sarrafa tashin hankali ya tabbata.
4. An tsara naúrar da kuma sanye take da allon taɓawa mai zaman kanta da PLC, kuma hulɗar ɗan adam-kwamfuta yana da santsi.
5. Sabuwar hanyar tura waya ta atomatik ana ɗaukar shi a wurin ciyar da waya, wanda ke da tsayin daka mai tsayi, kuma yana iya ba da siginar turawa daidai bayan an fitar da shi, wanda zai iya kammala aikin atomatik na bututun takarda a ƙarƙashin waya da kuma a kan. bututun takarda tare da manipulator na gaba.
Tambaya: idan wani ɓangare na kayan aiki ya lalace, za ku iya samar da kayan da suka dace?
A: kafin karɓar kayan aiki, kamfaninmu na iya samar da kayan aiki masu dacewa kyauta;Idan a cikin lokacin garanti, za mu iya taimaka wa abokan ciniki su saya, idan ya cancanta, za mu iya siyan ku.
Tambaya: Shin kayan aiki zasu iya tabbatar da cewa fiber na carbon yana da ƙananan kuma babu wani haɗari na mamayewar fiber da lalacewa lokacin da aka yi amfani da bitar samarwa na dogon lokaci?
A: kowane ɓangaren kayan aikin an tsara shi kuma an sanye shi da aikin rufewa, wanda zai iya tabbatar da cewa fiber carbon ba zai iya mamaye tsarin sarrafawa a cikin majalisar ba, don kare tsarin kayan aiki na kayan aiki.
Tambaya: Shin kayan aikin suna da yanayin haɓaka don yankan waya ta atomatik na gaba?
A: kayan aiki na iya samar da sigina na ƙananan igiyoyin taimakon pneumatic bayan da iska ta cika, kuma za ta iya yin hulɗa tare da kayan haɓaka na gaba.
1. Ƙananan gazawar kayan aiki, aiki mai sassauƙa, samar da kwanciyar hankali da abin dogara;
2. Shigarwa da daidaitawa na kayan aiki yana da sauri sosai, kuma bayan-tallace-tallacen mayar da martani mai nisa yana da lokaci sosai idan akwai shakka;
3. Maɓalli mai mahimmanci yana da ma'ana kuma mai sauƙin aiki;
4. Abubuwan kayan aikin bazuwar sun cika kuma bayanan bazuwar kayan aiki daidai ne;
5. Tsarin iska yana da kyau, kuma ƙarshen fuska yana haifar da sakamako ba ƙasa da na'urar ɗaukar kaya da aka shigo da ita ba!6.Diamita na iska, nauyin gram da sauran sigogin iska sun hadu da tsammanin da ka'idojin masana'antu.
